Chalmers Plumbing & Heating
Our Services

Boiler Installation

Professional gas boiler installations across Glasgow and nearby towns. Combi, system and conventional boilers fitted with correct sizing, commissioning and manufacturer registration for reliable performance.
About This Service

A new boiler sized for your home

Our Gas Safe-registered engineers carry out every domestic boiler install across Glasgow and surrounding towns. Worcester Bosch-accredited and Viessmann-trained, the team fits combi, system and conventional boilers with correct sizing, full commissioning and manufacturer registration. We provide full documentation, and every installation complies with current gas regulations.

We’re heating engineers based in Glasgow, serving Bishopbriggs, Cumbernauld, Coatbridge and the surrounding area. Our boiler installation in Glasgow covers straight swaps, moves and full changes of system.

A new boiler sized for your home

Get an instant boiler estimate

Instant Boiler Estimate
Our process
Our Process

How It Works

A Gas Safe engineer conducts a full site survey of pipe runs, cylinder type, insulation levels and flue options, then recommends the correctly sized combi, system or conventional boiler.

Our accredited installers fit the boiler, new controls and any required cylinders or tanks, following manufacturer guidelines and current gas safety regulations.

We commission the system, provide completion certificates, register the appliance with the manufacturer and show you how to use the controls.

Benefits

What you get with Chalmers Plumbing & Heating

Gas Safe & manufacturer accredited

All gas work is completed by Gas Safe-registered engineers and Worcester Bosch/Viessmann-trained installers for safety, warranty eligibility and correct commissioning.

22+ years local experience

Over 22 years serving Glasgow homes means we understand tenements, suburban semis and modern new builds, and we size installations for real-life heat loss and water use.

Insured, documented, dependable

Work is fully insured with public liability cover, supplied with certificates and manufacturer registration from the day we hand over.

Local engineers who do the job properly. We install combi, system and conventional boilers across Glasgow, Clydebank and surrounding towns. That includes correct flue selection, heat exchanger checks, magnetic filters where needed and pipework modifications for optimal flow. We also handle landlord HMO installs and register appliances with the manufacturer so warranties remain valid.

Ready to book a survey? Our team will give a clear scope of work, written completion paperwork and guidance on controls and servicing options.

Which boiler suits your home?

  • Combi: heats water straight from the mains, with no hot water cylinder or tank. It's the usual choice for a tenement or modern flat and most homes with one bathroom, because it saves space and the flue can often go through an outside wall.

  • System: heats a hot water cylinder, often a mains-fed unvented one. It suits a suburban semi or detached house with two or more bathrooms, where several taps and showers run at once.

  • Conventional: works with a cylinder and a cold water tank in the loft. Some older houses still have one, and it can stay where the pipework or water pressure suits it better.

Changing from a storage tank system to a combi is one of the most common jobs we do. The survey checks your mains pressure and flow first.

What's included in your installation

  • A site survey, with heat loss and hot water demand checked

  • A correctly sized combi, system or conventional boiler

  • New controls, with smart controls if you'd like them. See smart controls and thermostats

  • Any cylinders or tanks your system needs

  • The right flue for your property, and a magnetic filter where needed

  • Pipework changes for good flow

  • Full commissioning and completion certificates

  • Registration with the manufacturer, so the warranty stays valid

  • A walk-through of your new controls

Where the system is full of sludge, we'll recommend powerflushing before the new boiler goes in.

What affects the price, and the savings

The instant estimate gives you a starting figure, and the survey gives you a written scope before any work is booked. The things that change the price most are:

  • changing boiler type, such as removing a cylinder and tanks to fit a combi

  • cylinder work, such as fitting a new unvented cylinder

  • new pipework, or a new flue route, especially in a tenement

  • the boiler and controls you choose

An old non-condensing boiler can waste a large share of the gas it burns, and a modern condensing boiler, sized correctly, uses noticeably less. If you're on a low income or certain benefits, Home Energy Scotland can tell you whether you qualify for help with the cost.

What our customers say

"Changing from a storage tank system to a combi boiler, with a dishwasher and washing machine install added as part of the job. Cannot thank Martin and his team enough. The work done was fantastic. Thoroughly explained at every stage." - Alan, Google

"Excellent experience with Martin and his team. They worked very hard to complete a complex install in our old house. Communication was excellent throughout and Martin has helped with a couple of queries after completion as well. Thoroughly recommend." - David, Google

FAQ

Frequently Asked Questions

Times vary by type and any additional pipework or cylinder work required. A straight swap of a like-for-like combi is usually quicker than converting from a conventional system. Your survey will give a realistic installation window and any disruption expected.

There will be planned downtime while we isolate and replace the appliance. For systems with hot-water cylinders we can advise on temporary arrangements during the swap and aim to complete work with minimum inconvenience.

Yes. We register new Worcester Bosch, Viessmann and other manufacturer boilers as part of commissioning so your warranty remains valid and you receive manufacturer support if needed. Our Care Comfort Plan covers the annual service most warranties need.

We carry out a heat-loss and hot-water demand check during the site survey, considering property type, radiators, insulation and occupancy. Correct sizing avoids short-cycling and gives efficient performance and a longer life.

Absolutely. All gas work is performed by Gas Safe-registered engineers, and we hold manufacturer accreditations and public liability insurance for homeowners and landlords.

It's usually time to think about a new boiler when yours is 12 to 15 years old or more, breaks down most winters, needs parts that are hard to find, or is an old non-condensing model. If a repair makes more sense, we'll tell you.

Gas Safe Registered
Trustatrader
Viessmann
Worcester Bosch
Ideal
Glow-worm Boilers

Get an instant boiler estimate

Click the button below to get started on getting an instant estimate for a new boiler installation.